|
| Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | |
| A box with the completed Macassar veneer on all surfaces. The Macassar veneer was resawn to approximately 6mm from the thicker boards that were rough cut from the billet. They were then sanded to 4mm thickness using our widebelt sander and 40 grit abrasive (to give the glue plenty of "tooth" to stick the veneer to the plywood. |
| Navigation Hints <-/-> Previous image / Next image | BackSpace Index page Home First Image | End Last Image | Space Start/Stop slideshow |